Monday, 25 June 2018

O GAUGE MODEL -- BR (ex - LNER) CLASS N5 0-6-2 [No. 69307]

LNER N5 No 69307
Gladiator Model Kits sell a 7mm scale (O gauge) kit that builds the N5 or N4 0-6-2T. And I have to presume that it must be one of those as my father made a 
number of different models using Gladiator kits and I have seen at least 2 or 3 different styles of N2, N5, N7 models that he created all having slightly different unqiue fittings included with them. 

Have found some information about this class;

Built 1898, Withdrawn December 1960

Parker introduced the 0-6-2T arrangement to the Manchester Sheffield & Lincolnshire Railway (MS&LR, later GCR) in 1889 as the N4. The basic design proved successful, and in 1891 he revised the design to produce the LNER N5. The MS&LR would classify the N5s as 9F, and used class 9C and 9O for two variants (see below). The revision replaced the original Joy valve gear with Stephenson link motion. He also replaced the round-topped firebox with a Belpaire firebox. In fact, the N5 prototype MS&LR No. 7 was the first locomotive built for a British railway to use the Belpaire design. The neighbouring Beyer Peacock & Co had been using them for a few years, but all of these locomotives were built for export.


Due to the experimental nature of No. 7's firebox, eleven months elapsed before the second locomotive (No. 47) was built. This was followed shortly afterwards by a third, No. 171. This experimental batch of three became class 9C. This length trial period appears to have proved useful because a weakness in the valve gear layout was identified. The valve rods were supported by tubular slide bars fixed to the motion bracket, with the motion bracket positioned in-front of the rocking shaft. All of the production locomotives had a slightly different arrangement and were classified 9F. These had suspension links fixed in-front of the motion plate, supporting the valve rods. The rocking shaft was also behind, and this gave an indirect drive to the valve via a spindle link. This arrangement proved highly successful and was used on virtually all subsequent MS&LR/GCR locomotives and Gresley's J38s and J39s.


O GAUGE MODEL CLASS N5The design was also ordered by Parker's successors, Pollitt and Robinson, resulting in a total of 131 N5s being built between 1891 and 1901. A total of twelve batches including the experimental batch were built.

Four of these locomotives worked with other railways. Nos. 754-5 were sold by the MS&LR to the West Lancashire Railway in 1894 and painted purple. The Lancashire & Yorkshire Railway took over the West Lancashire Railway in 1897 and retired the two 9Fs in 1914. The other two were ordered by the Wrexham Mold & Connah's Quay Railway (WM&CQR) in 1896, and were numbered 17 & 18. The Great Central Railway (GCR) absorbed the WM&CQR in 1905 and renumbered these two engines 409 &. 410 respectively. This brought the GCR's total roster to 129, all of which entered LNER ownership in 1923. It should also be noted that the WM&CQR hired three further 9Fs from the MS&LR/GCR between 1896 and 1901.



O GAUGE MODEL CLASS N5
Class N5/3 No. 9311 at Lincoln in 1948; Larger side tanks, Ross pop safety valves, and footsteps at front
With construction occurring over eleven years and twelve batches, they were built with a number of boiler of variations. 

The main trend was a general reduction in the heating surfaces of the boilers. The last six locomotives were built with what would become LNER Diagram 21. This boiler design was eventually fitted to all of the N5s. This boiler was one of the first that Robinson experimented with superheating, and a total of ten N5s had superheaters fitted between 1915 and 1923. All of the superheaters would eventually be removed. The last was removed in 1943, although No. 5410 was withdrawn in 1936 before its superheater was removed.

The first N5 to be superheated was No. 771 (LNER No. 9311) in November 1915. This was also rebuilt to increase the coal and water capacity. The smokebox was extended to take the new superheater, but the side-tanks were also extended to be inline with the front of the new smokebox. The tanks had openings to allow maintenance of the valve motion. The sides of the coal bunker were raised, and the back was curved at the top. The radial trailing axle was replaced by a pony truck, allowing tighter curves to be negotiated. When the superheater was removed in 1930, the extended bunker, tanks, and smokebox were retained. The GCR classified No. 771 as 9O, and the LNER gave it the sub-class of N5/3 in 1938. It is thought that the modifications were to allow No.771 to haul a shuttle service between Chester and Connah's Quay. However, it only worked this service for fourteen months before being re-allocated and never hauled another passenger service.


O GAUGE MODEL CLASS N5In common with most of the GCR locomotives, the original chimneys were replaced with shorter chimneys and domes to fit within the LNER Composite Loading Gauge. Unmodified locomotives were given the sub-class of N5/1, whilst the modified locomotives became N5/2. These modifications occurred between 1925 and were completed in 1938. The N5/2 designation was eventually dropped.

The N4s and N5s became the GCR's standard shunting and trip working locomotives. After finishing the last N5, the GCR only built specialised shunting locomotives, e.g. for dock and hump shunting. At Grouping, the N5s were distributed amongst twelve sheds, with large allocations at Gorton and Mexborough. Shortly after Grouping (1923), the LNER purchased large numbers of ROD O4 2-8-0s which displaced older J11 0-6-0s onto the Mexborough trip working duties. This dispersed Mexborough's N5 allocation throughout the GC system. The displaced N5s tended to take over J58 and J59 saddletanks which were being withdrawn at the same time.


In the late 1930s, the J11s also displaced many of Gorton's N5s to other duties. Some moved to Trafford Park where they hauled passenger services, and replaced J10s on their shunting duties.


During the 1940s, a number of N5s were allocated to the GN Section. N5s allocated to Bradford hauled passenger trains to Halifax via Queensbury. Copley Hill had an allocation that acted as the Leeds Central station pilot, but also hauled a number of local services during World War 2. Retford and Newark also had allocations for shunting work.

Withdrawal

O GAUGE MODEL CLASS N5

The first withdrawal occurred in 1936, but only eight had been withdrawn by 1945. The remaining 121 locomotives all survived into British Railways ownership (1948). The rapid introduction of diesel shunting locomotives during the 1950s took their toll and withdrawals of the surviving N5s in the late 1950s was rapid. Many were stored during this time. Two of these stored locomotives were moved to Tyne Dock for banking duties, but this appears to have been unsuccessful as they were moved to New England after a few months.

Sheffield (Darnall) had the last large allocation, and these were replaced in 1959 by diesel shunters. Nineteen N5s survived at the beginning of 1960, and all were withdrawn before the end of the year. The last N5 was withdrawn from Gorton in December.


Preservation


The last N5 was withdrawn at the end of 1960, and none of these pioneers of the Belpaire firebox survived into preservation.


O GAUGE MODEL CLASS N5

Saturday, 23 June 2018

PATHFINDER TOUR -- CLASS 50s MAZEY DAY CELEBRATIONS CORNWALL

Mazey Day Cornishman

23/06/2018
Images courtesy of Brady Sibson and Anon.

Saturday 23rd June, 2018


IT’S THE MAZEY DAY CELEBRATIONS IN PENZANCE SO JOIN OUR MERRY TRAIN FOR THE ANNUAL MID-SUMMER TRIP TO CORNWALL. THERE ARE OTHER OPTIONS AS WELL!


No one quite knows how long ago it was that the Cornish started to celebrate Midsummer (Golowan in the Cornish language), but it was noted as ‘an antiquity’ in 1754. After the festival was banned on the grounds of ‘health and safety’ in the 1980s(!) it was revived in 1991 and is re-established now as a leading annual event.

To get there is an absorbing journey close to the longest day of the year, being light almost from start to finish, so that you can sit back and enjoy crossing the Somerset Levels to Taunton, over the Blackdown Hills and down to Exeter. At the water’s edge we run along the Exe Estuary and out onto the famed sea-wall, then inland to Newton Abbot and steeply up and down along the edge of Dartmoor to Plymouth before the crossing of the River Tamar using Brunel’s Royal Albert Bridge into Cornwall.

There is little straight or level track right through the county to journeys end, but there are deep valleys and lofty viaducts amidst delightful scenery, past Liskeard to Lostwithiel and through St. Austell to Truro, where you may alight for a four hour break. Continuing west we reach St. Erth, where we set down passengers for the branchline train (local return fare around £4) to picturesque St. Ives, a small town that offers something for everyone - beaches, specialist shops, harbour and even a Tate Gallery.

Five miles west is lines end at Penzance, where the Mazey Day festivities will be in full flow, including colourful parades, music, stalls and the like. For something different, the bus station is adjacent to the railway station and offers local journeys to Lands End, Mousehole and Marazion (for St. Michael’s Mount).

MOTIVE POWER IS EXPECTED TO BE A PAIR OF CLASS 50 LOCOMOTIVES WORCESTER TO PENZANCE AND RETURN, WITH A DB CARGO CLASS 66 NORTH OF WORCESTER.


Estimated Timings
Joining Stations
Depart
Return
Tame Bridge Parkway05102340
Birmingham New St.05302320
Stourbridge Jn05552255
Kidderminster06102240
Droitwich Spa06302220
Worcester Shrub Hill07002150
Cheltenham Spa07252125
Cam & Dursley07452105
Bristol Parkway08052045

Saturday, 9 June 2018

HILLINGDON RAILWAY MODELLERS 2018 OPEN DAYS -- SATURDAY 9th JUNE


Welcome again, it's time for another Open Day at Hillingdon Railway Modellers, these regular events are very popular and the next one will be held on 
Saturday 9th June 2018.

Haven't attended here for a little while so this is a good opportunity to get myself over there and give a few of my Dads O Gauge models a bit of a run out since I've no room for a layout at home and I don't want them to live in boxes forever. I aim to hopefully get there for the afternoon with a few items in my bag to try out and also update a few pictures too. It's always a popular day and doors open to the public at 10:00am.

Club Events For 2018
DateDescription
9 JuneTest Track Open Day (confirmed)
25 AugustTest Track Open Day (confirmed)
6/7 OctoberGrindley Brook at Wigan Show
27 OctoberTest Track Open Day (confirmed)
15 DecemberTest Track Open Day (confirmed)
O Gauge Test Track

Address 
Yiewsley Baptist Church
74 Colham Avenue
West Drayton  UB7 8HF

* the entrance is at the side of the church down a path and the doors at the end should be open, don't try and enter the main doors of the church. 




Owing to rental costs of the hall there is a cover charge of £4 but there will be two extensive O Gauge and OO Gauge Test Tracks available and have recently added a three track N Gauge circuit too (Pic Below) all up and running so if you have anything you wish to see get a good run do please come along.

N Gauge Test Track
N GAUGE TEST TRACK 
There are always plenty of refreshments available, Tea, Coffee and cold drinks for the youngster, in addition the freshly made bacon rolls are highly recommended. (just don't scoff them all before I get there!!)

It should be stressed that these ARE NOT exhibitions, so please bring your own locos and rolling stock to run. At busy times we may have to introduce time slots so that everyone can get a chance to operate their stock. Here's a short clip of one of the earlier open days YouTube LINK

Below you can see a busy picture of their 8 road yard in O Gauge it's a very extensive track and will give your models a very good run. A few photo's taken from the previous open days are below, if you read back to some of the earlier postings in this blog I have tried to show the variety of excellent models on show, these guys are truly experts in their craft I only wish I had some of their talents and skills.

Test Track O Gauge

O Gauge Test Track

People will bring a wide variety of stock to run, nearly all are kit built though and the skills / detail is incredible.

Everyone will get their turn I promise.


O Gauge Test Track sizeI hope that these pictures give a good indication of the size of the O Gauge test track, you can give your models a really good work out here. This formation can also transform into an exhibition layout called Grindley Brook a scenic section replaces the long straight down the back.

This layout was shown at the Warley show at the NEC Birmingham in November 2017 and will be making an appearance at the Wigan Show in October 2018 so well done to all concerned getting this large layout out there to be enjoyed by people far and wide. Will aim to update on that exhibition later in the year. 

Grindley Brook O Gauge Exhibition Layout


A few more pictures from some of the previous Open Days, though they mostly focus on the O Gauge track there are also Test Tracks available for OO and N Gauge too. There are many society members on hand who are both extremely friendly and knowledgeable too so if you have any problems with modelling or questions they will be more than happy to try and help i am sure. 

Caen and Jersey

Working in the fiddle yard on the test track

O Gauge Test Track

OO Gauge Test Track
THE BUSY OO GAUGE TEST TRACK

London Underground stock on the OO Gauge Test Tracks
LONDON UNDERGROUND STOCK MAKE A WELCOME APPEARANCE
N GAUGE TEST TRACK
N GAUGE TEST TRACK

N GAUGE TEST TRACK WITH BRIGHTON BELLE
BRIGHTON BELLE IN "N". SOON TO REAPPEAR ON MAINLINE TOO
HOW TO GET THERE:
If you are Travelling by Car
Check here for Parking Options.

Nearest Railway Stations :
West Drayton [0.34 miles]

Saturday, 2 June 2018

DIESEL ELECTRIC MODELLERS (DEMU) SHOWCASE -- 2/3 JUNE 2018


DEMU Showcase 2018 Burton upon TrentShowcase 2018
DEMU Showcase is the premier UK exhibition dedicated to diesel and electric modelling and will be on the weekend of 2/3 June 2018.

Opening Times
Saturday 2nd June  10.00 - 17.00
Sunday 3rd June   10.00 - 16.00

Venue
Burton Town Hall, King Edward Place, 
Burton upon Trent, DE14 2EB. 

The venue is situated a very close to the railway station in Burton upon Trent (about a 5 minute walk). However there is now very little/no parking at the Town Hall so would recommend parking in the station car park (between the Travelodge and the railway lines) or in Derby Street car park (in front of the Travelodge opposite the station). The organisers politely request that the street parking spaces in front of the Town Hall be left free for exhibition staff and exhibitors.

Tickets
All tickets are valid for the whole weekend to allow you enough time to see all the exhibits.

Ticket prices are:
  Adults   £9
  DEMU members / children (U16)   £6
  Families (2 adults and unlimited children)   £22

Layouts
Diesel Electric Modellers Showcase 2018
ALDERFORD OO GAUGE MODERN IMAGE
  Alderford (4mm OO, above) 
  Burton on Trent (2mm N2)
  Deadman's Lane (4mm OO)
  Devonport Road (4mm OO)
  Ebsworth Street (4mm OO)
  Farmer's Drove (2mm N)
  Friday Bridge (4mm EM)
  Fryer's Lane (4mm P4)


Diesel Electric Modellers Showcase 2018
Longcarse West (4mm P4 - Right)
Longcarse West is based on a few run down sidings in the Alloa area of Central Scotland in the period 1975/6. This was once a busy area with both the Caledonian and North British Railways building lines to tap into the local coal, glass making, brewery and distillery business. 

  Oil Drum Lane (4mm OO)
  Sandiacre (4mm OO)
Stapleforth St Stephen's OO Gauge modern image
Stapleforth St Stephen's 
(2mm N below)
The layout is a ‘N’ gauge mainline of freelance design, with a track plan designed to provide train movements which are entertaining and hopefully appreciated by those watching and a headache to the operators if they make a mistake. Stapleforth St Stephen's is normally set at the time of the Privatisation Era (1995-present) and you will see representations of all locomotives and stock which have run during the period. 

This layout is 15ft x 3ft and provides continuous running to and from the fiddle yard accommodating 21 full length trains (mostly freight) and as an end to end - fiddle yard to terminus station and return for 9 passenger trains. As you can see from the image below it is very busy, plenty for the visitor to enjoy and also for the operators too. 
Diesel Electric Modellers Showcase 2018